Comfort, security, and lower energy use for the homes you equip
Devices in the home talk to each other over IoT. Lighting, air conditioning, and security then follow one set of rules instead of separate remotes, so the household is easier to run, more comfortable, and safer when nobody is watching a panel.
One command reaches every connected device
Cameras, locks, and alarms stay on around the clock
HVAC and lighting follow occupancy instead of staying on
How the home system is layered
Lighting, climate, security, and the appliances behind them
Indoor and outdoor lights follow a scene, a schedule, or the amount of daylight, and the platform shows how much energy that saved.
Air conditioning, underfloor heating, and fresh air move together. Temperature, humidity, and air quality stay in range without a separate setpoint for each unit.
Video, the door lock, intrusion sensors, and smoke alarms sit in one view instead of four apps.
Appliances share one list: remote control, running state, and a warning before a fault becomes a service call.
Sleep, morning, dinner, and leaving the house
The house settles itself when someone is ready for bed
On a schedule or a single command, lights go off or dim, the air conditioner moves to a sleeping temperature, and the TV and speakers shut down. Security comes on. Curtains close for privacy and darkness. The air purifier drops to quiet mode. Setpoints can follow that person’s sleep habits and the room’s temperature and humidity, so the bedroom is ready without a walk through every room.
A single trigger runs the whole scene. Nobody walks the rooms.
Temperature and humidity follow that person’s sleep pattern and the room’s readings.
Appliances that are not part of the night get switched off, and security comes on.
Morning mode can start from the sleep schedule, so the next scene is already set.
Light, warmth, and hot water arrive before the alarm does
Before the set time, curtains open slowly so daylight comes in like sunrise, and indoor lights rise from dim to bright. Music starts quiet and gets louder. Air conditioning or underfloor heating has already brought the room to a comfortable temperature, and the water heater has hot water ready. A coffee machine can start on the same schedule. The change is gradual, so the body moves from sleep to awake instead of being jolted.
A sunrise curve of daylight and music, instead of a single loud alarm
Room temperature and hot water are already where they should be
The coffee maker and similar appliances start on the same clock
Each family member keeps a separate wake time and preference
Light, sound, and airflow set for the table, not for the TV
Dining-area lights move to a moderate brightness and color temperature, so the table is neither glaring nor dim. Music stays under the conversation. Airflow is steered off the table and the temperature stays in a range that suits a meal. The TV mutes or switches off. A diffuser can join the same scene, so dinner is about the people at the table.
Brightness and color temperature set for eating, easier on the eyes
A quiet track that does not compete with conversation
Direction and temperature adjusted so the vent is not aimed at the table
Entertainment devices mute so the meal can hold the room
Locks, sensors, and idle loads checked before the door closes
Lights, air conditioning, the TV, and audio that nobody needs switch off. The lock engages. Door and window sensors report anything still open. Cameras record and motion sensors arm. If the forecast calls for rain or a hot afternoon, windows and shades move to keep water out and heat down. The fridge and water heater drop to an economy mode so they keep working without holding a full setpoint all day.
Appliances that are not needed switch off, so they are not a fire risk or a bill
Open latches and an unlocked door raise a notice before you are far from the building
Cameras and motion sensors stay armed, and the household can look in remotely
The fridge and water heater stay available without holding a full load all day
App, gateway, radio, and the devices on the wall
What one community measured after the scenes were in daily use
Whole-home systems for 500 households, covering lighting, air conditioning, security, and appliances.
How households rated the deployment
Architecture notes, and a place to ask about a building-wide rollout
Tell us the unit count and the scenes you want, and we will match gateway, radio, and devices to that building